Question:

What do I do if there is low or no suction when pumping with the Pump In Style?

Answer:
  1. Make sure all connections of the kit and breastpump are secure.
  2. If single pumping, make sure the port plug is placed into one of the single pumping ports.
  3. Make sure white membrane is laying flat against the yellow valve head.  Check that the yellow valve head is clean and not damaged.  Refer to the assembly instructions.
  4. Make sure the diaphragm cap or faceplate on the front of the breastpump fits evenly and securely.
  5. Make sure the ends of the tubings are fit securely into the backs of the breastshields and into the ports on the diaphragm cap or faceplate.

Watch the Troubleshooting video.


This Question Applies to: